Head protection safety talk: OSHA 1910.135 requires head protection if there is a risk of falling objects or there is a risk from contact with live electrical conductors. Wearing appropriate head protection can prevent serious injuries. Head protection must meet (ANSI Z89.1: Type I Industrial Helmet (Protection against superior impacts) or CE EN397.
I need not repeat that where there are hazards to the eyes, goggles should be worn or when you have to handle heavy things that can crush your feet, wear safety shoes. With these same common sense rules, when exposed to the risk of falling objects, safety helmets are needed. That is to say, today our topic is the Head protection safety talk.
Sometimes we are protected by elevated platforms, but if your work requires movement and being in different places, at one time or another you can put yourself in danger. Some may not like to wear helmets. I know some of them who don't like to use it until they have their own personal painful experience.
Wearing a hard hat at your job or any other job where there is a danger of falling objects
shows that you are interested in protecting yourself and cooperating with company management. Remember, we must not think that our head is hard enough to withstand all the blows.
Head protection safety talk: the importance of safety helmet
Head protection safety talk
Class E. (Limited protection against accidental and short-term contact with high-voltage conductive elements –Tests at 20,000-30,000v) for employees exposed to high voltage electrical shock and burns. Head injuries are caused by falls or falling objects or by hitting your head against a fixed object. Other head injuries come from electrical shocks and burns.
Helmets are designed to do two things: resist penetration and absorb the shock of a blow. They decrease the chance of injury because they are designed with a hard outer shell and inner suspension system.
The head is the upper part of the human body where the brain and sensory organs are housed. The cranial cavity, made up of bones, has as its main function to protect the brain. Protective helmets are Individual Protection Equipment designed to protect the head from the risks existing in the workplace or to avoid or reduce the damage resulting from an accident.
Protective helmets are mainly made up of a rigid element (shell that defines the general external shape of the helmet), an internal harness (supports and absorbs the energy derived from the impact) and accessories (such as those intended for adjustment and fastening to the head).
Safety helmet construction
Head protection safety talk
There are several types of protective helmets depending on the field of use, for example, helmets for industrial use (protection or safety helmet, high-performance helmet, crash helmet), firefighter helmets, electrically insulating helmets for use in low voltage, forestry helmets, technical rescue helmets and sports helmets (mountaineering, horse riding, canoeing, etc.)
Protective (or safety) helmets. Its main function is to protect the upper part of the head against falling objects. They can additionally protect against other risks (for example accidental electrical contact, splashes of molten metal etc.). It is the most widely used helmet and there are a wide variety of models.
Safety Helmet Care Considerations
Head protection safety talk
The following are key points to consider in the selection and use of this equipment:
- Your hull should be inspected daily for signs of dents, cracks, or penetration. Do not use if any of these signs are found on the helmet or suspension.
- Sunlight and heat can damage the helmet.
- Clean once a month in hot, soapy water. Cleaning the safety helmet should follow the manufacturer's instructions. If necessary, clean it with mild detergents and warm water (less than 45 degrees C). Then it should be issued to dry.
- Safety helmets should never be deliberately painted, taped, marked with markers or scratched as this will damage them. Some types of solvents can damage the hull or weaken the hull. The suspension is the most important part of the helmet. You should keep the helmet 1 ¼ off your head.
- SAFETY HELMETS should be stored in a climate away from direct sunlight and heat sources.
- It is recommended to replace the helmet after 3 years of manufacture. Cases made of polypropylene, polyethene or ABS, are slow to alter. However, they lose mechanical resistance due to the effect of heat, cold and sun exposure, they usually lose resistance. Therefore, this suggestion is made to prevent any type of accident.
- Discard the helmet after any significant impact, if it has deep scratches, is worn or distorted, creaks when bulging, the harness is damaged or distorted, or exceeds its useful life.
- Do not modify the helmet (for example: by drilling ventilation holes, painting it, making markings or putting stickers on it).
Conclusion
Head protection safety talk
Worker safety is always the highest priority on job sites, head protection is an essential element to protect workers from falling debris, swinging objects or electrical hazards. This updated ANSI standard demands that a safety helmet be worn correctly and properly marked under any activity where there are hazards to the head.
The most common cause of head injuries is the impact of a sharp object. The consequences of the impact depend on the energy, shape and kinetic hardness of the object. The head can be injured by a falling object or hitting an unprotected object. The result can be a permanent disability or even death.
May you like
- slip trip fall hazards
- Active and reactive monitoring HSE
- Responsibilities of safety officer
- Lower explosive limits
- Hand protection safety talk
